RSSeOrbo replication 2 update 9
Jun 20
eOrbo replication 2 Orbo, Steorn No Comments
This is so frustrating. With the new controller the milling machine sometimes has its own mind. Suddenly it moves to a position it should not have moved to and I have to start over. Cutting through 10mm Lexan is done 0.5mm or 1mm at a time and if the random move happens when the cutter is 9mm into the Lexan the cutter grinds to a smoking halt putting a tremendous load on the machine, the spindle motor and the cutter. Now the Z-axis is out of adjustment and the cutter is bent (or maybe it is the spindle motor). In a last attempt I will reinstall the old controller, try to adjust the machine and try again. Time is running out.
Recent Comments